Short answer: using the Coconut Development Board’s published project profiles, 1,000 mature coconuts give roughly 100 kg of desiccated coconut, 60 kg of virgin coconut oil, 250 kg of coconut cream, or 50 kg of spray-dried coconut milk powder. Those numbers alone do not choose your first product line. They come from separate profiles with different assumptions, and they ignore by-products, utilities, shelf life and market access. A better approach is to convert each figure to the kernel it implies, check it against your own nuts, and then compare lines on raw-material demand, evaporation load and route to market.

This article is for entrepreneurs, investors and consultants deciding which coconut product to start with, or which to add to an existing plant. It sets out the published yields, cross-checks them with a simple kernel balance, and gives a comparison framework you can fill in with your own data.
The published yields
The figures below are from CDB’s compilation of processing technology profiles, Innovative Technologies in Coconut Processing Sector. They are expressed per 1,000 nuts for easy comparison. The financial figures in those profiles (project cost, IRR) date from earlier years, so we have not used them.
| Product | CDB profile yield | Per 1,000 nuts | Nuts per tonne of product |
|---|---|---|---|
| Desiccated coconut | 1 tonne from 10,000 coconuts | 100 kg | about 10,000 |
| Virgin coconut oil | about 600 kg from 10,000 coconuts | 60 kg | about 16,700 |
| Coconut cream | 2,500 kg cream (plus 500 kg residue) from 10,000 ripe coconuts | 250 kg | about 4,000 |
| Spray-dried coconut milk powder | about 1,000 kg from 20,000 coconuts | 50 kg | about 20,000 |
| Coconut chips | 1,000 kg per day from 10,000 nuts per day | 100 kg | about 10,000 |
| Packed tender coconut water | about 2,000 litres from 10,000 tender nuts | 200 litres | (different raw material) |
Tender coconut water uses young nuts, so it competes for a different supply chain. Coconut chips include infused sugar, so their mass is not kernel alone. The rest of this article compares the four lines that use mature kernel: DC, VCO, cream and milk powder.
Cross-check: what kernel does each figure imply?
A yield per nut is really a statement about how much usable kernel each nut gives and how much of it the process recovers. We can test the published figures with a simple balance.
Assumptions: fresh coconut meat contains about 47% water and 33.5% fat (USDA FoodData Central, SR Legacy entry for raw coconut meat). DC is at 3% moisture, wet basis. Fat and solids recovery percentages are stated in each row. These are illustrative assumptions, not GTI performance data.
| Line | Calculation | Implied usable kernel per nut |
|---|---|---|
| DC, 100 g per nut | 100 g × 0.97 = 97 g dry solids; 97 ÷ (1 − 0.47) at full solids recovery | about 183 g |
| VCO, 60 g per nut | 60 g ÷ 0.335 fat, at 85% fat recovery | about 211 g (179 g even at 100% recovery) |
| Cream, 250 g per nut | If the cream meets the Codex minimum of 20% fat: ≥ 50 g fat; ÷ 0.335 at 85% recovery | about 176 g or more |
Two conclusions follow. First, the published yields are broadly consistent with each other: all imply roughly 175–215 g of usable kernel per nut. Second, that is a planning average. Nut size, variety, maturity and storage change kernel weight considerably. If your nuts give more pared kernel, every line scales up in proportion; if they give less, every line scales down. Before you size anything, weigh the pared kernel from a representative sample of nuts and analyse its moisture and fat. Our fat-balance method for coconut milk extraction shows how to do this for milk-based lines.
Milk powder is not in the table because the powder mass includes carriers. Codex permits maltodextrin and sodium caseinate in aqueous coconut products, and commercial powders commonly use such ingredients. That makes the “per nut” figure depend on the recipe. See spray drying versus freeze drying for coconut milk powder for the formulation side.
Planning your first coconut processing line? Request a quotation from GTI.
Tell us your product, target capacity, raw-material data and site location. GTI Group engineers will review it and prepare a proposal for your project, in India or abroad.
Water to remove per 1,000 nuts
Drying is often the biggest thermal load in a coconut plant, so it helps to know how much water each line must evaporate. Illustrative calculation; assumptions stated.
- DC: wet gratings at an assumed 50% moisture dried to 3%. Per kg of DC: 0.97 kg solids ÷ 0.50 = 1.94 kg wet feed, so about 0.94 kg of water is evaporated. Per 1,000 nuts (100 kg DC): about 94 kg of water.
- Milk powder: spray-dryer feed assumed at 25–35% total solids (the Codex coconut cream range is 25.4–37.3%), dried to 3% moisture. Per kg of powder: 0.97 kg solids ÷ 0.25–0.35 = 2.77–3.88 kg feed, so 1.77–2.88 kg of water is evaporated. Per 1,000 nuts (50 kg powder): about 89–144 kg of water, in a spray dryer.
- VCO: the oil itself needs only final moisture removal in a vacuum or low-temperature dryer. A larger drying duty arises only if you dry the residue for sale as coconut flour. See our article on coconut flour from milk residue.
- Liquid cream or milk: no evaporation, but chilling and pasteurising, retorting or UHT treatment instead. Our comparison of chilled, retorted and UHT coconut milk covers those choices.
Thermal energy (steam, hot air or fuel for drying) and electrical energy (fans, motors, homogenisers, centrifuges, compressors) should be listed separately in any feasibility study. The heat figures depend on dryer design and heat recovery, which a supplier must state.
Comparison framework
| Factor | Desiccated coconut | Virgin coconut oil | Coconut cream / milk | Coconut milk powder |
|---|---|---|---|---|
| Nuts per tonne (CDB profiles) | about 10,000 | about 16,700 | about 4,000 (cream) | about 20,000 |
| Core GTI equipment | Paring, grinding, blanching, band or fluid bed dryer, cooling, grading, packing | Paring, grinding, milk extraction, cream centrifuge, optional fermentation tanks, oil separation, vacuum or low-temperature dryer, oil filtration | Milk extractor, filtration, chiller, pasteuriser, homogeniser, filling, retort, cream centrifuge | Milk line plus mixing and homogenising, spray dryer, powder handling, packing |
| Main utility load | Dryer heat | Separation power; low-temperature oil drying | Refrigeration and heat treatment | Spray dryer heat (highest per kg) |
| Product form and logistics | Dry, bulk bags, ambient | Liquid oil, ambient | Liquid; chilled or sterilised packs | Dry powder, ambient |
| Key quality risks | Salmonella control, moisture, FFA | Moisture, FFA, peroxide value | Emulsion stability, spoilage | Stickiness, fat oxidation, solubility |
| Main by-products | Parings, coconut water, shells | Residue (flour), water, shells | Residue, skim, water, shells | Residue, water, shells |
Equipment lists are taken from GTI’s product pages for the desiccated coconut plant, virgin coconut oil machinery, coconut milk and cream plant and coconut milk powder plant. The exact scope for any project depends on capacity and product specification.
How to use the framework
- Start from the market, not the yield. A product you can sell under contract at a known specification beats a higher-yield product without buyers.
- Check raw-material reach. Multiply your target output by nuts per tonne. A 2 t/day DC unit needs about 20,000 nuts per day on the CDB average; the same output of milk powder would need about 40,000. Our raw-material cost outlook discusses supply risk.
- Size the utilities. Water evaporated per day and refrigeration load decide the boiler or heater, power connection and effluent plant.
- Plan by-products from day one. Every line releases coconut water and shells; DC also releases parings. These can become revenue or a disposal cost. See what to do with mature coconut water and paring oil processing.
- Consider staged lines. Some plants start with one product and add a second that uses the first line’s streams, for example milk residue to flour, or cream to VCO. Layout and utilities should leave room for that.
For broader context, our sister site’s overview of GTI coconut processing solutions and gtidryers.com’s coconut drying systems page describe the drying technologies behind each line.
FAQ
Which coconut product gives the most output per nut?
By mass, liquid coconut cream: about 250 kg per 1,000 nuts in the CDB profile, because it retains water. By dry matter, the lines are much closer, since they all draw on roughly the same kernel.
Are these yields guaranteed?
No. They are published averages and our illustrative cross-checks. Actual yield depends on your nuts and process, and must be established by trials and a supplier mass balance.
Can one plant make DC and VCO from the same nuts?
Not from the same kernel. A plant can, however, split its nut intake between lines and share common front-end equipment and utilities.
Related guides and GTI equipment
This guide is part of GTI’s coconut processing series. Related reading and equipment:
- DC plant sizing mass balance: sizing the line you choose.
- coconut milk extraction yield: yield detail for milk and cream.
- CDB TMoC subsidy (India): funding the first line.
- coconut raw-material cost signals: cost per kg.
- GTI turnkey coconut projects: project scope.
- GTI coconut drying systems: dryers by product.
Sources
- Coconut Development Board, Innovative Technologies in Coconut Processing Sector (project profiles: desiccated coconut, VCO, coconut milk and cream, spray-dried coconut milk powder, coconut chips, tender coconut water).
- Coconut Development Board, desiccated coconut technology note: “Yield of the product is 1 tone from 10,000 coconuts”.
- USDA FoodData Central, SR Legacy food 170169, “Nuts, coconut meat, raw” (water 46.99 g, fat 33.49 g per 100 g).
- Codex Alimentarius, Standard for Aqueous Coconut Products, CXS 240-2003 (composition table and permitted ingredients).
About this article
Prepared by the Genex Tech Industries LLP (GTI Group) editorial team. Yields are quoted from CDB publications; the kernel and evaporation figures are our own illustrative calculations with the assumptions stated. They are not performance guarantees.
Compare product lines with GTI
GTI Group, engineering since 1985, supplies desiccated coconut, VCO, coconut milk, milk powder and by-product lines. Send us your nut data, target products and markets, and we can prepare comparative mass balances for your options.
Request a quotation for your first coconut processing line
Send your capacity, product specification and site details through our quotation request form, and GTI Group will respond with a proposal.
For more information, email mktg@coconutprojects.com or call or WhatsApp us on +91-87774 75596.
