Short answer: coconut processors are heading into 2027 with raw-material costs that are firming again after an easier 2026. Mid-November market data show European coconut oil prices above the year-end range forecast earlier in 2026, Philippine copra prices rising week on week and Indian traders expecting copra supply to tighten before the next harvest. At the same time, producing countries are pushing hard for more domestic processing, which increases competition for fresh nuts. For plant planners, the practical response is the same whatever the price does next. Measure recovery per nut, design by-product lines in from the start, and size utilities so the plant earns from every part of the coconut.

This analysis is for owners of desiccated coconut, coconut milk and virgin coconut oil plants, and for investors preparing feasibility studies. It summarises recent, dated market signals and then gives a simple framework for testing a project against raw-material price swings.
What the market signals say (as of mid-November 2026)
| Signal | Detail | Source and date |
|---|---|---|
| Global supply recovering, but below 2024 | Coconut oil production forecast at 3.025 million tonnes in 2026, up 10.8% on 2025 but 13.5% below 2024. The Philippines was forecast to rise 20.4% and Indonesia 8.5%. | International Coconut Community, Global Coconut Oil Market Outlook 2026 |
| Competition for fresh nuts | The same outlook says competition for fresh coconuts from VCO, coconut milk and desiccated coconut, together with ageing palms and slow replanting, will keep copra availability constrained | ICC outlook, 2026 |
| Prices above earlier forecast | The ICC outlook projected coconut oil easing to about US$1,850–1,950 per tonne by end-2026. Trade reports for the week to 16 November put European coconut oil at about US$2,110 per tonne CIF, and a Philippine Coconut Authority (PCA) daily report of 11 November at US$2,125. | ICC outlook; trade market reports citing PCA, 16 Nov 2026 |
| Philippine copra rising from a lower base | National average farmgate copra was PHP 40.96/kg (PCA, 11 November), up from PHP 40.00 a week earlier, but about 29% below the PHP 57.53/kg of a year earlier | Trade market reports citing PCA, 16 Nov 2026 |
| India: short-term copra tightness | In Kerala, copra rose ₹2 to ₹158/kg while coconut oil eased to ₹250/litre. Traders expect tighter supply before the new season after mid-January, with rainfall deficits in southern states supporting copra prices. | BusinessLine, 12 Nov 2026 |
| Indonesia’s downstream push | Government aims for more than 90% of plantation-commodity exports to be processed products. Coconut is one of seven priority commodities, with 151,554 ha of coconut plantation development in 2026. | Palm Oil Magazine, 6 Nov 2026 |
| Regional roadmaps favour integrated, zero-waste plants | An ICC and North Sulawesi framework calls for a shift from copra trading to high-value products, integrated lines that use every part of the nut, and at least three major downstream investments moving to implementation within 12 months | ICC, 3 Nov 2026 |
| Shell and by-product investment | Foreign investors are inspecting sites in Davao del Norte for a facility to process about 20,000 tonnes of coconut shells a year into activated carbon and charcoal products | Philippine News Agency, 3 Nov 2026 |
These are short-term indicators, not a forecast. Prices can turn quickly with weather and harvest timing, as the ICC outlook itself notes. What they do show is a structural pattern. More processors want the same nuts, and governments are encouraging more value to be captured locally.
Why copra prices matter even if you never touch copra
Desiccated coconut, coconut milk and VCO plants buy fresh nuts, not copra. But copra and coconut oil prices set the farmer’s alternative. If drying nuts into copra pays better, farmers and traders divert nuts away from fresh-nut buyers. A trade report on 16 November pointed out that rising copra prices create cost pressure for desiccated coconut processors as well as oil mills, because both ultimately compete for the same raw material. For a food-grade plant, the copra price acts as a floor under the price it must pay for fresh nuts.
Planning a coconut processing project budget? Request a quotation from GTI.
Tell us your product, target capacity, raw-material data and site location. GTI Group engineers will review it and prepare a proposal for your project, in India or abroad.
A simple framework: raw-material cost per kilogram of product
Illustrative method. Figures are for showing the calculation only and must be replaced with your own measured data and local prices.
The core equation is:
Raw-material cost per kg of product = price per nut × nuts needed per kg of product
Take desiccated coconut. India’s Coconut Development Board uses an average recovery of about 10 kg of desiccated coconut per 100 nuts, so about 10 nuts per kg. We used the same figure in our desiccated coconut plant sizing mass balance. Two consequences follow:
- Price sensitivity: every 1 unit of currency added to the nut price adds about 10 units to the raw-material cost of each kilogram of desiccated coconut.
- Yield sensitivity: if recovery falls from 10 to 9 kg per 100 nuts, for example because more immature or poorly stored nuts arrive, nuts per kg rise from 10 to about 11.1. That is an 11% rise in raw-material cost per kg at the same nut price.
In other words, a modest drop in recovery can cost as much as a significant rise in nut price. Recovery is the variable a plant controls, through intake inspection, buying by weight or quality grade, storage time and paring losses.
Stress-test the feasibility study
Before committing to capacity, run the project at three nut prices (current, +20% and −20%) and at two recovery levels (planned and planned minus 10%). If the project only works in the best case, the plan needs more by-product income, a different product mix or a smaller first phase.
The grid below shows raw-material cost per kg of desiccated coconut as an index, where today’s nut price at 10 kg recovery per 100 nuts equals 100. It uses only the equation above, so you can rebuild it with your own figures.
| Recovery (kg DC per 100 nuts) | Nut price −20% | Nut price today | Nut price +20% |
|---|---|---|---|
| 10 (planned) | 80 | 100 | 120 |
| 9 (planned −10%) | 89 | 111 | 133 |
The worst cell, higher prices combined with weaker recovery, raises raw-material cost by a third. Weak recovery at today’s price costs more than a 10% price rise with good recovery. If your margin cannot absorb the bottom-right cell, the project needs a buffer.
By-product streams: from cost to revenue
The same signals that raise nut costs make by-products more valuable. Every stream below exists in a typical kernel-based plant. Planning space, utilities and drainage for them at the design stage costs far less than retrofitting later.
| Stream | What to measure | Possible product route | Related GTI page |
|---|---|---|---|
| Coconut water from deshelling | Litres per 100 nuts; time from opening to collection; Brix | Chilled or packed coconut water; coconut water powder | Coconut water extraction; coconut water powder plant |
| Parings (testa) | Kg per 100 nuts; oil content | Paring oil and cake | Coconut paring oil plant |
| Milk or VCO residue | Kg per day; moisture; oil (dry basis) | Coconut flour plus high-quality oil | Coconut flour from residue |
| Shells | Tonnes per day | Boiler fuel, charcoal, activated carbon feedstock | Coconut shell chips drying; activated carbon drying |
| Husk | Tonnes per day, if husked nuts are bought | Coir fibre and coco peat | Coconut fibre and coir plant |
Our sister site summarises these routes on its waste-to-value coconut products page.
Utility planning: thermal and electrical are separate decisions
When raw material is expensive, wasted product and wasted energy both hurt margins. Treat the two utility sides separately:
- Thermal: dryers, blanchers and pasteurisers. Shells from your own deshelling line are commonly used as boiler or furnace fuel. Whether that suits your dryer’s heating system, your emissions permit and the higher value shells could earn elsewhere is a site-specific decision.
- Electrical: fans, grinders, presses, centrifuges, pumps and chillers. These are usually set by equipment selection and operating hours, not by fuel choice.
Ask every supplier to state thermal demand and electrical load separately, at a stated output and moisture, so options can be compared fairly. GTI’s desiccated coconut processing plant pages list capacities on a finished-output basis, which is the right starting point for these comparisons.
What this means for new projects
- Secure raw material before capacity. Map nut supply, competing buyers and seasonal swings in your catchment, including copra buyers.
- Buy and measure on recovery. Weigh output per batch of nuts from day one. Our article on what 2026’s new coconut plants signal for planners discusses product-mix choices.
- Design for by-products in phase one, even if some lines are installed later.
- Keep product-mix flexibility where your market allows it. Lines that share front-end equipment, such as deshelling, paring and grating, can shift output between desiccated coconut, milk and VCO when relative prices change.
- Re-check prices at decision time. The figures above are dated. Use current local nut prices, not this article, for investment decisions.
Frequently asked questions
Will coconut prices fall in 2027?
Nobody can say reliably. Indian traders quoted by BusinessLine expect tightness before the new season and easier supply after mid-January. The ICC’s 2026 outlook expected easing as harvests recovered, but mid-November prices were above its year-end range. Plan for volatility rather than a single price.
Is a by-product line worth it for a small plant?
It depends on volume. Measure your by-product streams for several weeks, then compare the revenue with the capital, labour and utilities needed. Coconut water and parings are usually the first streams to assess, because every kernel-based plant generates them.
Related guides and GTI equipment
This guide is part of GTI’s coconut processing series. Related reading and equipment:
- yield per 1,000 nuts by product: turning nut price into cost per kg.
- CDB TMoC subsidy guide for Indian units: capital support for Indian projects.
- 2026’s new coconut factories: what recent investments signal.
- mature coconut water as a second product: recovering value from by-products.
- GTI turnkey coconut projects: project scope.
Sources
- International Coconut Community, Global coconut oil market outlook 2026.
- Trade coconut market reports for the week to 16 November 2026, citing Philippine Coconut Authority daily data (11 November 2026).
- BusinessLine, Coconut oil prices remain flat despite copra supply shortage, 12 November 2026.
- Palm Oil Magazine, Indonesia targets 90% of plantation exports to be processed products, 6 November 2026.
- International Coconut Community, ICC and North Sulawesi strategy to accelerate coconut downstreaming, 3 November 2026.
- Philippine News Agency, Investors eye coconut shell processing plant in Davao del Norte, 3 November 2026.
- Coconut Development Board (India), desiccated coconut project profile (recovery of about 10 kg per 100 nuts).
About this article
This article was prepared by the Genex Tech Industries LLP (GTI Group) editorial team from the dated public sources listed above. Market figures are as reported on the dates shown and will change. The cost framework is illustrative. This is not price forecasting or investment advice.
Build resilience into your coconut project
Genex Tech Industries LLP (GTI Group), engineering since 1985, designs integrated coconut processing plants, including desiccated coconut, coconut milk, VCO, coconut water and by-product lines. Share your raw-material data and target products, and we can help you plan a phased, by-product-ready layout.
Request a quotation for a coconut processing project budget
Send your capacity, product specification and site details through our quotation request form, and GTI Group will respond with a proposal.
For more information, email mktg@coconutprojects.com or call or WhatsApp us on +91-87774 75596.
